Melinoe Descura Witch's Staff STL Files - Hades II Cosplay Prop (Digital Download)

Melinoe's Witch's Staff from Hades II! This is the digital .STL files for you to download and print at home on your own 3D printer. The files are split for 25cm tall machines.

The staff measures approx. 145cm and is modelled for various 10mm and 6.3mm diameter dowels for internal structure (see .txt in zip file for more info on rod lengths & printing!). We recommend using aluminium rods to reduce weight! You will also require 1x 10mm diameter clear acrylic rod for the floating orb.

FILES FOR PERSONAL USE ONLY.

Don't forget to tag us in social media posts featuring our props/accessories as @illustrismodels (instagram/twitter) and Illustris Models and Printing (Facebook). Support us so we can continue to support cosplayers like you!

Descura is split for 25cm tall printers and features a twist lock mechanism part way down so it can split apart for storage and travel!

To assemble your Witch's Staff, you'll require a few pieces of external hardware. These are as follows:


- 1x 10mm diameter rod, 77cm (for Staff Lower)
- 1x 10mm diameter rod, 11cm (for lowest section/twist lock area of Staff Upper 4)
- 1x 6.3mm diameter rod, 6.6cm (Staff Upper, seam A)
- 1x 6.3mm diameter rod, 15.4cm (Staff Upper, seam B)
- 1x 6.3mm diameter rod, 9.4 cm (Staff Upper, seam C)
- 1x 6.3mm diameter rod, 5.9cm (Staff Upper, seam D)
- 1x 6.3mm diameter rod, 5.2cm (Staff Upper, seam F)
- 1x 6.3mm diameter rod, 8.4cm (Staff Upper, seam G)
(yes, we forgot E when we were modelling so seam E does not exist, don't worry about it 😂)
- 1x 6.3mm diameter rod, 5.8cm (Between Moon Upper & Lower)
- 1x 6.3mm diameter rod, 3.5cm (Between Moon Upper & Lower)
- 1x 10mm clear acrylic rod, 14.5cm (for floating orb)

Additional finishing and painting supply Recommendations can be found here: Finishing Guides