Madoka Bow 3D Printed Kit - Puella Magi Madoka Magica Cosplay Prop

Madoka's bow from Puella Magi Modoka Magica! This is the physical print in PLA Filament.

The bow measures approx. 120cm OR 160cm, and has internal channels modelled in for dowels to add strength to the internal structure (we recommend using aluminium rods to reduce weight). See final product image for rod lengths depending on your bow size. 

For large kits such as this, please allow 2-4 weeks print time!

Don't forget to tag us in social media posts featuring our props/accessories as @illustrismodels (instagram/twitter) and Illustris Models and Printing (Facebook). Support us so we can continue to support cosplayers like you!

For the 120cm bow you will require:
3x 6.3mm Diameter (1/4 inch), 10.5mm length
1x 6.3mm Diameter (1/4 inch), 5.5cm length
2x 6.3mm Diameter (1/4 inch), 12cm length
1x 6.3mm Diameter (1/4 inch), 31.5cm length
1x 6.3mm Diameter (1/4 inch), 16cm length
2x 6.3mm Diameter (1/4 inch), 5.5cm length
(total Length 120cm)

For the 160cm bow you will require:
2x 6.3mm Diameter (1/4 inch), 18mm length
1x 6.3mm Diameter (1/4 inch), 15cm length
1x 6.3mm Diameter (1/4 inch), 49cm length
1x 6.3mm Diameter (1/4 inch), 16cm length
1x 6.3mm Diameter (1/4 inch), 13cm length
1x 6.3mm Diameter (1/4 inch), 18.5cm length
2x 6.3mm Diameter (1/4 inch), 7.5cm length
(total Length 137cm)

Recommendations for finishing supplies can be found here: Recommended Supplies

Please allow 2-4 weeks for Production, as all of our kits are made to order!