HILDA Staff STL Files [Legend of Zelda: A Link Between Worlds] Illustris Models

HILDA Staff STL Files [Legend of Zelda: A Link Between Worlds]

Name: HILDA Staff STL Files [Legend of Zelda: A Link Between Worlds]
Brand: Illustris Models
Price: 13.0 AUD
Availability: InStock

$13.00 AUD $18.00

Quantity

Hilda's Staff from the Legend of Zelda: A Link Between Worlds! This listing is for the digital .STL files ONLY. It is split for 22x22x25cm beds.

The staff is scaled to measure approx. 180cm in length, but it is modelled to slot onto a 25mm rod/dowel so you can make it as tall or short as you need! The floating triforce is modelled with a channel for a 10mm clear acylic rod that slots into it and the rest of the staff head. We recommend using a strong glue such as 2-part epoxy for this just to be safe.

A NOTE REGARDING SLICING: The floating triforce clocks in at 217x217mm, so it can print on a 220x220mm bed. HOWEVER, Cura slicer limits your printable area to between the bulldog clips that keep the bed in place on older Ender3 units. You can change this in the gcode but that gets a bit fiddly. We recommend slicing on Prusa Slicer instead, and with minimal to no brim to ensure you're not accidentally slicing out of range! As for the lower staff head, it will print fine but needs to be on a diagonal!

For information on commercial use of our models, please see our FAQs.

Don't forget to tag us in social media posts featuring our props/accessories as @illustrismodels (instagram/twitter/tiktok) and Illustris Models and Printing (Facebook). Support us so we can continue to support cosplayers like you!

HILDA Staff STL Files [Legend of Zelda: A Link Between Worlds]

Recently viewed